Coolest Birthday CakesCake Decorating Contest

Awesome Dinosaur Birthday Cake Photos and Tips

My gorgeous niece wants to be a palaeontologist when she grows up, she’s seriously nearly one already, with all her knowledge on the subject! Anyway, she loves dinosaurs in particular. I thought she might be a little old now for a dinosaur birthday cake but when asked she REALLY wanted one, so I thought this one would be pretty cool. I got my inspiration online, I ‘think’ the original might have been from a place called Sweet Love.

(You can also find inspiration from these Dinosaur birthday cake ideas.)

  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake
  • Awesome Funky Dinosaur Tree Birthday Cake

I like to do as much of the decorations as possible beforehand, to save time. I started with the dinosaur first so it could dry in parts and be good and solid and sturdy by the party. I made the legs first and attached the claws. I used red fondant (making red from white fondant and dye is time consuming and it gets quite wet). I also added a little Tylose powder to the fondant to make it a little firmer. It needs to nearly be the consistency of Play dough or things start to change shape too easily.

I inserted a toothpick in each leg so that the body had something to stick to once the legs were dry. I left them for 2 nights before making the body. I inserted a wooden kebab skewer in to the body where the neck and head would eventually go, to give support. All of this I left to dry on waxed baking paper so it wouldn’t stick to the board. I used a slim book, just the right height, so that the tail had something to support it while it dried. I left this 5 nights to really firm up, before making the head.

I obviously didn’t make the fondant thick enough with Tylose for the head/ neck. It can be tricky getting the amounts right, as if you use too much, it can dry and crack and wrinkle. I usually add a little, leave it a bit, then feel it’s firmness, add more if needed. I was in a rush and ended up having to lie the while dinosaur down, after the head was added, otherwise the weight of it made the skewer stick out his head!! So he had a flat head at the back (not that anyone minded). I made the mouth and nostrils at this point before it set. I used a pen to support one leg so it didn’t add weight to it leaving it hanging while the dinosaur lay down to fully dry. I used sugared water to attach all parts together as “glue”. You just use a teaspoon of sugar and boiling water and stir/mash it in til it’s almost all dissolved.

Next, I made him some eyes with a circle cutter (I actually just used one that was made for the center of number cookie cutters). The black pupils were made with a straw (just the perfect size) as a cutter. I used sugared water to stick these together and on to the dinosaur.

I made the orange tree next on the same night as I made the spots for the dinosaur, this saves time and money on mixing up colors. I used a straw for some circles, took apart a pen to use the circle part of it for others (after washing it!!) and the circle cutter I had. I applied them all with sugar water and made some spikes for his back and attached these with royal icing (which sets VERY hard like super glue).

For the orange tree, I cut out with a sharp knife, leaves that were all pretty much the same size, 3 dark ones, 5 light ones and then 2 sides of the tree. I used black fondant to cover the join and applied with sugar water. It’s easier to apply the leaves to the tree on the same night so they’re soft enough to mold in over the black strip.

I made the red tree next and the age “11”. To make the numbers, you need to insert toothpicks in the base of the numbers before they dry so you have some way of attaching to the cake later. I just used a cookie cutter number 1. I used Tylose to firm up the fondant and once dry, I painted the outside edges with black dye and a special thin paintbrush I keep aside just for cakes. For the tree, see the picture below, just use 3 different circle cutters or make your own template from baking paper and use a sharp knife. I cut 2 black circles as well (see pic), but in hindsight, I’d actually just paint with black dye so they weren’t too chunky and heavy, around the edges of the 2 smaller circles.

The other trees are self-explanatory if you use the pics as a guide. I used black dye to paint the twigs and trunks once they were DRY. With the green tree, you need to make leaves of differing sizes, starting with large at the bottom and going to small at the top of the tree. This was the last tree to go on the cake, I made the leaves in advance and left to dry and attached them once I’d painted a trunk directly on the cake with black food dye. I made the twig in the Dino’s mouth in advance and left to dry once I knew it would fit in his mouth. I used dark brown dyed fondant for the twig, it looked better than black.

When I made the green tree, I took the opportunity to make the 2 greens and I stored them in tight plastic food wrap inside an airtight container, I made quite a bit so it didn’t dry out. I used a letter cutter to cut out the name, first in green, then in black, then placed the green carefully on top of the black with sugar water.

I used a great chocolate cake recipe which is so moist and lovely and chocolaty but still firm enough to hold all that fondant. I made 3 cakes to get the height (the night before the party) and used ganache as a yummy filling on the day.

I got the board prepared first with the pale green icing. I had to microwave it slightly to soften it up since I made it in advance, it worked well. You just roll it out and apply like you would to a cake (after using a little ganache or sugar water to help it adhere to the board). Use a sharp knife to trim to the board shape. I crumb coated the cake (lots of tutorials online for this) and I then applied the pale blue fondant to the cake. It’s best to watch a YouTube tutorial on how to apply fondant. I use a pizza wheel to trim around the excess fondant. After smoothing fondant down with a smoother, I carefully picked the cake up and applied to the covered cake board.

I attached the middle green tree first as a starting point and then the orange and then the green one on the side. You need to work quickly so you can remove the little bite the Dino has taken from the cake above the green tree, before the blue fondant sets. Add all other trees and paint on their trunks with black food dye. Leave to dry for a few hrs before attaching a ribbon around base of cake (I use a clean pin to attach at the back and tell the host it’s there). Add the Dino to the covered cake board (you need to ensure he won’t fall over during transportation – royal icing is best) and attach the name with sugar water or royal icing (just a little so the white icing glue doesn’t show). Put a ribbon around the cake board, I used double sided tape for this.

The dinosaur birthday cake was the BIGGEST hit! Some of the adults wanted one for their own birthdays (ha!) and the cake was obviously pretty yummy since it was demolished within 20 minutes!! Some kids went back for a 5th serving! The look on my niece’s face made it ALL worth it, she grinned from ear to ear and it melted my heart. This is why I love doing cakes!


Coolest Dairy Free Stegosaurus Dinosaur Birthday Cake

My little boy cannot eat dairy so this Stegosaurus dinosaur birthday cake is a totally dairy free carrot cake – with dairy free ‘butter’ cream filling. The cake is just one large rectangular carrot cake, which I then cut it into three and sandwiched together to get the height. Then I sculpted the cake into the right shape.

  • Coolest Dairy Free Stegosaurus Dinosaur Birthday Cake
  • Coolest Dairy Free Stegosaurus Dinosaur Birthday Cake
  • Coolest Dairy Free Stegosaurus Dinosaur Birthday Cake

I was quite pleased with the result – especially as right up until I started to bake the cake (the day before his birthday) he had wanted a snake cake. To be precise he wanted a ‘white-lipped pit viper on a branch’ cake. As you can imagine, this had taken a lot of thought, planning and not inconsiderable stress! Then, just as I was about to start, he says – actually I want a dinosaur cake! He was absolutely adamant. So, we did a quick run through the various possibilities and he settled on a stegosaurus. Last minute change of plan aside, I must admit I was quite relieved! The snake on a branch was not going to be easy…!

So I made and sculpted the cake and covered it in icing which I rolled with a textured rolling pin. The head, spines and tail are also made of icing, so the whole thing is edible. Even the little ‘Jurassic’ trees are made of icing, and the ‘dirt’ is a mixture of edible sprinkles.

He loved it and his friends thought the Dinosaur birthday cake was very ‘cool’ – for some reason they all wanted either part of the head or the thagomizers!


Coolest Green Dinosaur Birthday Cake

I created this dinosaur birthday cake for my son’s 2nd birthday. Firstly, I started with using 2 packet mixes per large Pyrex bowl and baked for about an hour until they were booked. Make sure you grease the bowl well as one of the cakes got a little stuck!

  • Coolest Green Dinosaur Birthday Cake
  • Coolest Green Dinosaur Birthday Cake
  • Coolest Green Dinosaur Birthday Cake
  • Coolest Green Dinosaur Birthday Cake
  • Coolest Green Dinosaur Birthday Cake
  • Coolest Green Dinosaur Birthday Cake

The body of the dinosaur was created from one of the cakes. I simply leveled the top of the cake and flipped it over. I carved a small semi-circle out of the dinosaurs body where the head was going to sit against the body.

The head of the dinosaur was created from the other cake. I leveled the top of the cake and flipped it over. As you can see in the photos the head was carved to shape once it had cooled. The off cuts were then used to create the feet which I simply cut pieces off until I got a shape that I was happy with.

The frills behind the head were made from the off cuts from leveling the cakes. I created a template out of paper so that I could get the shape that I wanted and the cake was then inserted in between the two cakes.

I crumb coated the cakes first and then covered each individual piece in fondant. I covered the body of the dinosaur in green fondant first. The feet were then covered and placed very closely against the body of the dinosaur. I used some extra icing to secure them there. I carefully covered the head and frills in fondant as the last piece and placed this closely against the body.

The dinosaur’s horns were made from chocolate fondant and the spots on the body are from fondant secured there with a small amount of water.


Coolest Dino 3rd Birthday Cake

I decided to do a dinosaur birthday cake as my son is Dino mad. I used rice crispies for the tail and legs, 20in round cake tin for the body cut in half and a loaf tin for the head carved to the shaped I wanted. I also built his head up a bit till it was high enough.

  • Coolest Dino 3rd Birthday Cake

To make the Dinosaur birthday cake I used a basic butter cream recipe and used sugar syrup. Covered in fondant I bought the yellow but I had issues with trying to have enough to cover him all in one go, I’d re-think how id do it next time. This Dino can also be a dragon so good for both. It took me two days, baked 1st day, decorated second day.

More Dinosaur Birthday Cakes

Take a look at all the cool Dinosaur birthday cake ideas on the site.



Top